Wall charging stations
OBO Ion charging station
Simple. Safe. Considered.
Electromobility continues to make progress and revolutionise our world. This applies to vehicles and the associated driving experience, as well as to the charging infrastructure. Our answer: The prewired, ready-for-connection OBO Ion charging station for relaxed, PV-optimised charging of electric vehicles – at home or even for a whole vehicle fleet on a company’s site. The impact-resistant housing rated to IK08 makes it extremely robust and, with a protection rating of IP66, it can be used in both indoor and protected outdoor areas.
Advantages of the OBO Ion charging station at a glance
- Charging according to Mode 3 in accordance with EN IEC 61851-1
- Can be subsidised acc. to KfW 442
- Single, dual and triple charging
- Charging power can be adjusted in 1 A steps: 1.4 to 22 kW (factory setting 11 kW)
- With a manual switch of the charging power to 11 kW, the charging station can qualify for the KfW subsidy in Germany, for example.
- Potential-free enabling contact, e.g. for PV systems: Ripple control receiver, timer, RFID module and smart home technology
- Modbus RTU protocol via RS-485 interface for bidirectional communication
- Permanently installed 5 m charging cable with type 2 connector for all current vehicle types, including cable holder
- With Green Zero Switch: 0.0 kW standby consumption
- Practical features: Integrated temperature monitoring, DC error current monitoring, status information via LED display
- Static and dynamic PV excess-current charging
Optional protection against wind and weather
The OBO Ion charging station is intended for indoor areas or protected outdoor areas. A weather protection roof is also available, which provides extra protection and convenience for charging stations in exposed locations.
Available in open or closable versions
It’s up to you: The Ion charging station is available with a key or a highly practical pressure switch. In easily accessible car parks, the use of the variant with key switches is recommended. The variant with pressure switch can also be used in private garages or other locations which are reliably protected against unauthorised access.
Optionally with integrated surge protection
For locations with a feed line of more than 10 metres in length or without a construction-side surge arrester, OBO can offer a variant of the Ion charging station with integrated type 2 + D1 surge protection for the data cables, in accordance with DIN VDE 0100-443. This means that both the charging point itself and the connected electric vehicle are protected against damage from surge voltages.
The Ion charging unit variants at a glance
The Ion charging unit is available in four different model variants, meaning that the right charging station can be found for any requirement and any installation environment:
- Ion Basic: With pressure switch, without surge protection
- Ion Key: With key switch, without surge protection
- Ion Basic Protect: With pressure switch and surge protection
- Ion Key Protect: With key switch and surge protection
