Junction box T 100, plug-in seal

Parent Item no. cxmOID177793
  • Protection rating IP 66
  • Halogen-free; without chlorine, fluorine and bromine
  • Verband der Elektrotechnik, Elektronik, Informationstechnik e.V., Germany
  • Communautés Européennes, EC declaration of conformity according to EC directives
  • Flame resistant 650 °C
  • M25 entry
  • KEMA-KEUR, Netherlands
  • Nominal cross-section 10 mm²
  • 10 cable entries
  • Nominal voltage 500 V
  • UV-resistant
  • IK Code 07

All the T series junction boxes are UV-resistant. They are made of a thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate (EVA). This plastic is soft, which means that it is malleable. This allows installation of cables through the 10 x M25 seals, or the seals can be cut with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. Alternatively, instead of seals, cable glands can be inserted through the openings and be countered internally with a locknut.
The junction boxes can be mounted on mounting plates in the openings on the floor using steel bolts 3.5 x 9.5.
Clear internal dimensions: 136x102x57 mm
Cover with labelling panel and lead-sealed.

Clear internal dimensions: 136x102x57 mm

Protection rating IP66; Protection rating IK code IK07.

All types

All types

Types Colour Version Entries Clear
internal
dimensions
Item no. Quantity SSU
T 100 Light grey; RAL 7035 Standard 10 x M25 136x102x57 mm 2007077
1 piece
Junction box T 100, plug-in seal
Junction box T 100, plug-in seal

Junction box T 100, plug-in seal

Item no. 2007077

Data sheet, 0.20MB, pdf
Download

Technical data

Expandable yes
No. of entries 10
Type of entry Cable
Type of entry Plug-in seal
Type of housing penetration Cuttable stepped membrane
Version Standard
Appendix document 634451 (tserie.pdf); 634124 (harte_typen.pdf)
Measured insulation voltage Vi 500 V
Equipment Without
Cover Not transparent
Cover fastening Screwed
Entries 10 x M25
Entry from rear yes
Explosion-tested version no
Flame resistant Flame resistant to VDE 0471/DIN 695 Part 2-1, test temperature 650 °C
Shape Rectangular
Function maintenance (ETIM) Without
For Ex zone Without
For Ex zone gas Without
For Ex zone dust Without
Fibre-glass reinforced no
Halogen-free yes
With screening no
with lid With four lid quick-release locks
With cover yes
Installation type Wall/ceiling mounting
Mounting type Wall/ceiling mounting
Nominal cross section 10 mm²
Nominal voltage 500 V
Protection rating IP66
Protection rating IP66
Protection rating IK code IK07.
Sealable yes
max. permitted ambient temperature -5 - 60 °C
Transparent lid no
Material description Polypropylene
Weatherproof no

Dimensions

Length 150 mm
Width 116 mm
Height 67 mm
Clear internal dimensions 136x102x57 mm
T 100 RW Pure white; RAL 9010 - 10 x M25 136x102x57 mm 2007533
1 piece
Junction box T 100, plug-in seal
Junction box T 100, plug-in seal

Junction box T 100, plug-in seal

Item no. 2007533

Data sheet, 0.19MB, pdf
Download

Technical data

Expandable yes
No. of entries 10
Type of entry Cable
Type of entry Plug-in seal
Type of housing penetration Cuttable stepped membrane
Version -
Appendix document 634451 (tserie.pdf); 634124 (harte_typen.pdf)
Measured insulation voltage Vi 500 V
Equipment Without
Cover Not transparent
Cover fastening Screwed
Entries 10 x M25
Entry from rear yes
Explosion-tested version no
Flame resistant Flame resistant to VDE 0471/DIN 695 Part 2-1, test temperature 650 °C
Shape Rectangular
Function maintenance (ETIM) Without
For Ex zone Without
For Ex zone gas Without
For Ex zone dust Without
Fibre-glass reinforced no
Halogen-free yes
With screening no
with lid With four lid quick-release locks
With cover yes
Installation type Wall/ceiling mounting
Mounting type Wall/ceiling mounting
Nominal cross section 10 mm²
Nominal voltage 500 V
Protection rating IP66
Protection rating IP66
Protection rating IK code IK07.
Sealable yes
max. permitted ambient temperature -5 - 60 °C
Transparent lid no
Material description Polypropylene
Weatherproof no

Dimensions

Length 150 mm
Width 116 mm
Height 67 mm
Clear internal dimensions 136x102x57 mm
T 100 RO-LGR Grey/red With red lid 10 x M25 136x102x57 mm 2007644
1 piece
Junction box T 100, plug-in seal
Junction box T 100, plug-in seal

Junction box T 100, plug-in seal

Item no. 2007644

Data sheet, 0.20MB, pdf
Download

Technical data

Expandable yes
No. of entries 10
Type of entry Cable
Type of entry Plug-in seal
Type of housing penetration Cuttable stepped membrane
Version With red lid
Appendix document 634451 (tserie.pdf); 634124 (harte_typen.pdf)
Measured insulation voltage Vi 500 V
Equipment Without
Cover Not transparent
Cover fastening Screwed
Entries 10 x M25
Entry from rear yes
Explosion-tested version no
Flame resistant Flame resistant to VDE 0471/DIN 695 Part 2-1, test temperature 650 °C
Shape Rectangular
Function maintenance (ETIM) Without
For Ex zone Without
For Ex zone gas Without
For Ex zone dust Without
Fibre-glass reinforced no
Halogen-free yes
With screening no
with lid With four lid quick-release locks
With cover yes
Installation type Wall/ceiling mounting
Mounting type Wall/ceiling mounting
Nominal cross section 10 mm²
Nominal voltage 500 V
Protection rating IP66
Protection rating IP66
Protection rating IK code IK07.
Sealable yes
max. permitted ambient temperature -5 - 60 °C
Transparent lid no
Material description Polypropylene
Weatherproof no

Dimensions

Length 150 mm
Width 116 mm
Height 67 mm
Clear internal dimensions 136x102x57 mm
T 100 M25-M32 Light grey; RAL 7035 Large entry 8 x M25 2 x M32 136x102x57 mm 2007081
1 piece
Junction box T 100, plug-in seal
Junction box T 100, plug-in seal

Junction box T 100, plug-in seal

Item no. 2007081

Data sheet, 0.20MB, pdf
Download

Technical data

Expandable yes
No. of entries 10
Type of entry Cable
Type of entry Plug-in seal
Type of housing penetration Cuttable stepped membrane
Version Large entry
Appendix document 634451 (tserie.pdf); 634124 (harte_typen.pdf)
Measured insulation voltage Vi 500 V
Equipment Without
Cover Not transparent
Cover fastening Screwed
Entries 8 x M25 2 x M32
Entry from rear yes
Explosion-tested version no
Flame resistant Flame resistant to VDE 0471/DIN 695 Part 2-1, test temperature 650 °C
Shape Rectangular
Function maintenance (ETIM) Without
For Ex zone Without
For Ex zone gas Without
For Ex zone dust Without
Fibre-glass reinforced no
Halogen-free yes
With screening no
with lid With four lid quick-release locks
With cover yes
Installation type Wall/ceiling mounting
Mounting type Wall/ceiling mounting
Nominal cross section 10 mm²
Nominal voltage 500 V
Protection rating IP66
Protection rating IP66
Protection rating IK code IK07.
Sealable yes
max. permitted ambient temperature -5 - 60 °C
Transparent lid no
Material description Polypropylene
Weatherproof no

Dimensions

Length 150 mm
Width 116 mm
Height 67 mm
Clear internal dimensions 136x102x57 mm
3D data
Invitation to tender text

Invitation to tender text

T 100 / 2007077
Download
T 100 RW / 2007533
Download
T 100 RO-LGR / 2007644
Download
T 100 M25-M32 / 2007081
Download
Downloads

Data sheet

T 100 / 2007077, 0.20MB, pdf
Download
T 100 RW / 2007533, 0.19MB, pdf
Download
T 100 RO-LGR / 2007644, 0.20MB, pdf
Download
T 100 M25-M32 / 2007081, 0.20MB, pdf
Download

Catalogues & Flyers

OBO Aquasit cold casting compound with IP68 protection rating, 0.27MB, pdf
Download
T series junction boxes, 5.42MB, pdf
Download
Overview of junction boxes, 3.72MB, pdf
Download

Declarations of conformity